RUDCO Products, Inc.

	6 1/4" 81" Stroke - 4 3/4" Rod Cylinder			Dump Angle is 52° on Both Hoists
	Interchangeable Cylinders			High Tensile - one piece full length Dividing Bar
	Single Stage Cylinders minimize problems. Rated at 3,000 PSI			Positive but single Container Lock for both Inside and Outside Roller Containers
	Rollers have outside Bracket for 3 Point Shaft Support			Heavy Duty Bumper - meets ICC Requirements
	Outside Rollers have Bronze Bushing & Grease Fittings			7 GA. Diamond Plated Fenders
	All Grease Fittings on Outside of Hoist Frame			Integral Rear Sealed Lights
	1/2" Plate Steel Hinge/Chassis and Cylinder Mounting Plates			Cast Alloy Steel Universal Cable Hook Standard
	2 1/2" Rear Hinge Pin with 1 1/4" Support Plates			44" long Rear Guide Angle with Rear Hold Down
	Main Tube Frame is 1/2" wall x 4" x 8" . ASTM A500-GRADE. C-50,000# Yield Main Frame			Weight of Hoist - mounted, with oil, 8200 lbs.
	Roller Pin Holes are Burned in the Main Frame			Low Cylinder Mounting Plates bent around truck frame to reduce shifting of Plates and stress on bolts
	Full Sub-Frame - 1/4" Tube - Factory Piped			Solid Steel Upper Cylinder Mounts and Rear Pivot Blocks
	Unit Factory Tested at 60,000 lbs.			All Grease Points accessible with frame lowered on truck chassis

Cable	7/8" x 75' 0" 6 x 25 IWRC, EIPS, 79,000 lbs. Breaking Strength
Cable Hook End	Hook w/Steel Swaged Button
Cable Anchor End	2" Thick Steel Eye w (5) U-Chips
Cable Travel	26' - 8"
Free Cable	4' - 4"
Cable Sheaves	5-10" Dia. with Bronze Bushing
Max. Dump Angle	52°
Outside Rollers	(10) 4" O.D. with Bronze Bushing
Rated Capacity Weight	60,000 8200 lbs. Mounted with oil
Operating Pressure	1900 PSI
Oil Tank Capacity	60 Gal.
Total Oil in System	80 Gal.
Oil Pump Spec.	27 GPM @ 1200 RPM 42 GPM @ 1800 RPM

Oil Filter Spec.	50 GPM @ 200 PSI (on return line) replaceable cartridge & pressure gauge
Control Valve Spec.	50 GPM 2 Spool Commercial
Cylinders - Lift & Reeving Cylinder	6 1/4" Bore x 81" Stroke, 4 3/4" Rod, Single Stage, Double, Acting
Hoist Up	26 Seconds
Hoist Down	21 Seconds
Winch On	21 Seconds
Winch Off	26 Seconds
Hoist Frame	4" x 8" x 1/2" Tubing (one piece)
Sub Frame	3" x 4" x 1/4" Tubing (one piece)
Top Rail Dividing Bar	3/4" x 2 1/2" Alloy Steel (one piece)
Lubrication	Zerte Fittings at all Wear Points
Inside Frame	34"
Outside Frame	35 1/2"


7/8" Cable IWRC, EIPS 79,600# Capacity Container Hol Down and Automatic Roller Locks	Tool Box (optional)	Inside Controls (optional) 60 Gallon Oil Tank	1/2" Plate Stell Cynlinder Mounting Plates and Syb Frame/Hinge Mounting Plate 7 ga. Diamond Plate Fenders